ExterIor Only DetaIls
Ext STAGE 1
THIS SERVICE IS FOCUSING ON LIGHT DECON OF THE PAINTED SURFACES AND POLISHING. DECON IS THE TERM GIVEN TO REMOVING PARTICLES THAT A HAND-WASH WILL NOT REMOVE. THESE PARTICLES ARE VISIBLE AND NON-VISIBLE LEAVING THE SURFACE FEELING ROUGH TO THE TOUCH. BY MEANS OF CLAY-BARRING AND LIGHT TAR REMOVAL THE PAINT WILL FEEL NICE AND SMOOTH AND PERFECTLY PREPPED FOR A VERY LIGHT POLISHING. THIS WILL MAKE THE PAINT GLOSSIER THAN BEFORE AND A LAYER OF SEALANT ADDED TO THE PAINT.
APPROXIMATELY 2HRS
-FACE OF WHEELS CLEANED
-WHEEL-WELL LINERS CLEANED AND DRESSED
-PH NEUTRAL WASH
-TWO BUCKET METHOD TO MINIMIZE SWIRL MARKS
-DOOR JAMBS CLEANED
-LIGHT TAR REMOVAL
-CLAY BAR
-DRIED VIA FORCED AIR & QUALITY MICROFIBER TOWELS FROM AUTOFIBER
-WATER-BASED TIRE DRESSING
-EXTERIOR GLASS CLEANED & SEALANT APPLIED
-PAINT POLISHED WITH AIO(ALL-IN-ONE) VIA DUAL-ACTION POLISHER
Ext STAGE 2
THIS LEVEL IS FOR CUSTOMERS LOOKING FOR LONGER LASTING PRODUCTS WITH 2X MORE POLISHING. FEATURING CERAMICPRO SPORT PAINT PROTECTION. I HAVE SEARCHED A LONG TIME FOR A PAINT PROTECTANT TO FILL THE GAP IN BETWEEN THE WAX/SEALANT CATEGORY AND THE EXPENSIVE CERAMIC COATINGS. CERAMICPRO SPORT FILLS THIS GAP PERFECTLY. EXTREME GLOSS AND HYDROPHOBICS MAKE THIS THE BEST PRODUCT WE CAN APPLY TO THE PAINT WITHOUT GOING INTO HIGH SOLIDS CERAMIC COATINGS THAT LAST MULTIPLE YEARS. MY FAVORITE PART OF THIS PRODUCT IS THAT IT GIVES CUSTOMERS A TASTE OF THE CERAMIC COATINGS EASE OF CLEANING AND HYDROPHOBICS. EXPECT 6-10MONTHS WORTH OF PROTECTION WITH PH NEUTRAL WASHES FROM HOME. IRON DECON IS INCLUDED AT THIS LEVEL WHICH IS A PRODUCT THAT CHEMICALLY DISSOLVES IRON DEPOSITS ON PAINT-WORK AND WHEELS. YOU CAN REALLY NOTICE THESE ORANGE SPOTS ON WHITE & SILVER VEHICLES & THEY ARE VERY UNSIGHTLY. A LONGER POLISHING CYCLE THAN THE STAGE 1 DETAIL WITH A CERAMIC-BASED AIO MEANS A GLOSSIER SURFACE TOPPED OFF WITH CERAMICPRO SPORT. ALSO INCLUDED ARE CERAMIC BASED DRESSING WHICH LAST MUCH LONGER THAN WATER BASED DRESSINGS ON PLASTICS AND TIRES.
APPROXIMATELY 3HRS
-FACE AND DRUM OF WHEELS CLEANED
-LIGHT IRON DECON OF PAINT WORK AND WHEELS
-PH NEUTRAL WASH
-TWO BUCKET METHOD TO MINIMIZE SWIRL MARKS
-DOOR JAMBS DETAILED
-LIGHT IRON DECON
-LIGHT TAR REMOVAL
-CLAY BAR
-DRIED VIA FORCED AIR & QUALITY MICROFIBER TOWELS FROM AUTOFIBER
-ANGELWAX SIO2 TIRE DRESSING
-ANGELWAX ENIGMA CORONA TRIM DRESSING
-ANGELWAX H2OGO WINDOW COATING APPLIED
-ANGELWAX AIO POLISH VIA DUAL-ACTION POLISHER
-LIGHT EXHAUST TIP POLISHING
-CERAMICPRO SPORT APPLIED TO PAINTED SURFACES
Ext STAGE 3
THE MAC DADDY! THIS SERVICE IS FOR CUSTOMERS LOOKING FOR THE HIGHEST ATTENTION TO DETAIL. FEATURING A 1 YR HIGH SOLIDS CERAMIC COATING AND A WHEEL FACE CERAMIC COATING. HIGH SOLIDS COATINGS ARE NOT SPRAY COATINGS THAT YOU CAN FIND IN STORES. THEY HAVE A HIGHER % Si02, MUCH BETTER CHEMICAL RESISTANCE AND CERAMIC COATINGS EASE OF CLEANING AND HYDROPHOBICS ARE AMAZING! BUGS WASH OFF VERY EASY AND ROAD GRIME JUST NEEDS THE SLIGHTEST AGITATION OF A WASH MITT AND IT EFFORTLESSLY CLEANS UP. EXPECT UP TO 12MONTHS WORTH OF PROTECTION WITH PH NEUTRAL WASHES FROM HOME. LASTLY THE WHEELS ARE THOROUGHLY DECONTAMINATED VIA IRON REMOVER'S PREPPING THEM FOR A HIGH TEMP INDUSTRIAL CERAMIC COATING ON THE WHEEL FACES.
APPROXIMATELY 5HRS
-FACE AND DRUMS OF WHEELS CLEANED
-PH NEUTRAL WASH
-TWO BUCKET METHOD TO MINIMIZE SWIRL MARKS
-DOOR JAMBS CLEANED
-LIGHT IRON DECON
-LIGHT TAR REMOVAL
-CLAY BAR
-DRIED VIA FORCED AIR & QUALITY MICROFIBER TOWELS FROM AUTOFIBER
-ANGELWAX SIO2 TIRE DRESSING
-ANGELWAX ENIGMA CORONA TRIM DRESSING
-ANGELWAX H2OGO WINDOW COATING APPLIED
-ANGELWAX AIO POLISH VIA DUAL-ACTION POLISHER
-LIGHT EXHAUST TIP POLISHING
-1 YR CERAMIC COATING APPLIED TO PAINTED SURFACES
-WHEELS FACES CERAMIC COATED WITH INDUSTRIAL CERAMIC COATING
